ATB700 Fully Threaded
Bar & 'AT' Rockbolts
Double Twisted
Hexagonal PVC
Coated Mesh
Composite Self Drilling
Soil Nails
FT500 Fully Threaded
Composite Bar & Tube
Self Drilling Steel
Anchor System
Turmag Drilling Machine
Welded Mesh
Fibre Mesh
 

  CIVILS
  
  Conisbrough Tunnel
  PorthKerry Tunnels
  The Bradway Tunnel
  Athens Metro
  Glenholt Tunnel
  Conway Castle
  The Sidmouth Cliffs
  A5 - North Wales
  Brokenberry Quarry
  Tondu Iron Works
  Chatham Dock
  A638 Rocknetting
  Blaston Hollow
  Whitehaven Harbour
  Coalfields Link
  Lancaster Canal
  Kingsand Sea Defence
  Doveholes
  
  MINING
  
  

Cliff Reinforcement/Rock Netting
Weldgrip Gripforce ® Rockbolts & Drilling Equipment

 
Sidmouth Connaught Gardens Cliff Reinforcement/Rock Netting
East Devon District Council
David Roche Geo. Consulting
Colin Jones [Rock Engineering Ltd]
Weldgrip Fibregrip ® Rockbolts & Weldgrip Drilling Equipment
 

The Connaught Garden Cliffs at Sidmouth are 15m to 18m high, overlooking the sea.

Weathering of the red sand-stone cliffs has made the footpath below the cliff face dangerous for public access.

Major work was carried out to reinforce areas of the cliff face and to secure the top section by Rock Netting over a length of 140m, to prevent any loose weathered rock from free fall.

Vegetation was cut back at the top of the cliff and a Polyester Geogrid - overlaid by a plastic coated wire mesh - was secured to the face by Weldgrip Fibregrip ® Rockbolts.

To re-establish the vegetation Hydroseed was used on the top section of the cliff. The rockbolts used were 22mm diameter x 1m long, with an 80kN nut and a 150mm diameter high load plastic end plate. The rockbolts were installed into 42mm diameter holes and grouted with a ratio of 0.4% water to O.P.C. (Ordinary Portland Cement).

The holes were drilled using a Weldgrip Turmag pneumatic hand held rotary drilling machine and turbine scroll auger rods with 42mm wing bits.


All the holes up to 3m in length, both for the reinforcing and rock netting, were drilled using this method. All the work carried out on the cliff face was by rope access.

The lightweight construction of the Weldgrip drilling equipment and Fibregrip ® Rockbolts gave better handleability and therefore improved safety for the rope access work.

Other advantages of using Weldgrip Fibregrip ® Rockbolts were:-

Quick and efficient method of installation
Cost effective, high corrosion resistant material for harsh environments
Installation of the non-metallic end plates was more sympathetic to the plastic coated wire netting than steel    plates.


Download the Printable PDF Brochure

If you would like to print the brochure for more information on our drilling products please click on the download button.

You will need Adobe Acrobat Reader to view and print the brochure, if you need to download a free version of Acrobat Reader please click here.

3.5 meg


Download the Printable PDF Brochure

If you would like to print the brochure for more information on our soil nails and rockbolts please click on the download button.

You will need Adobe Acrobat Reader to view and print the brochure, if you need to download a free version of Acrobat Reader please click here.

4.2 meg

© 2006 Weldgrip Geotechnical , All Rights Reserved